Going to video me screwing around and at the dyno w/ nitrous


#1

BUT… how do i get the video from my camcorder to my puter??? I feel so stupid… But im not into computers.


#2

RE: Going to video me screwing around and at the dyno w/ nit

either a firewire connection if both your camera and your cpu has a that ability (most all newer camera’s do but cpu’s don’t, gotta buy a $30 firewire port). either that or fork out about $50 on something like a Pinnacle DVC-80 setup from Sears or something that allows you to use rca inputs from your camera to load into a USB port on your cpu. Firewire by far is the best way - those are the only 2 ways I know how.


#3

RE: Going to video me screwing around and at the dyno w/ nit

Ok, so go to Best buy or some crap and buy a “firewire” so that will what? Allow me to plug in a card into my computer and it will have rca inputs? lol. Just a guess, correct me if im wrong. Thanks buddy.


#4

RE: Going to video me screwing around and at the dyno w/ nit

If your PC doesn’t have a firewire port built into the motherboard, then you can buy a firewire PCI card and plug it in to an available slot on your motherboard, provided you have room. That is the port card MD is referring to. Firewire is the fastest transfer method for external peripherals so it’s the best way to transfer video to your PC. Just check your camera and make sure it has a firewire out port. It should if it’s fairly recent.

http://www.bestbuy.com/site/olspage.jsp?skuId=6243898&type=product&id=1069301596482

Something like that.